To play from an iPod

1. Press the PWR button to turn on the audio system.

The system turns on in the last mode used.

2. Connect your iPod to the USB input terminal.

Refer to “How to connect an iPod”.

3. Press the CD button several times to switch to the iPod mode. The input mode changes every time the CD button is pressed.

CD mode → iPod mode → Bluetooth® mode

NOTE

• If your vehicle is equipped with audio input RCA terminals, pressing and holding the CD button for 2 seconds or more switches the system to the AUX mode.

4. Once the device is selected, playback starts and “i” appears on the display.

NOTE

• Depending on the condition of your iPod, it may take a longer time before the playback starts.

5. To stop the playback, press the AM/FM button or CD button to switch to a different mode.

NOTE

• Buttons on the iPod are disabled while the iPod is connected to the audio system.

• To adjust the volume and tone, refer to “To adjust the volume” and “To adjust the tone”.

To fast-forward/reverse the track

To fast-forward/reverse the current track, press the button or button.

Fast-forward

To fast-forward the current track, press the button.

While the button is pressed, the track will be fastforwarded.

Fast-reverse

To fast-reverse the current track, press the button.

While the button is pressed, the track will be fastreversed.

To select a desired track

Press the TRACK button to select the desired track number.

Press : The track number increases by one.

Press : The track number decreases by one.

Press for a long period (approx.

2 seconds or more) : The track number increases continuously while the button is pressed.

Press for a long period (approx.

2 seconds or more) : The track number decreases continuously while the button is pressed.

If the side of the button is pressed once while a track is playing, playback returns to the start of that track.

NOTE

• Every time the track selection button is pressed, the track number in the display changes.

To find a track from the iPod menu

You can select desired tracks from the “Playlists”, “Artists”, “Albums”, “Songs” or “Genre” (vehicles with Bluetooth® 2.0 interface) menus on your iPod.

Operate the following switch to select desired tracks.

The selected menu or category or track is shown in the display.

Turn the FOLDER switch : To show the menu or category or track.

Press the FOLDER switch : To select the menu or category or track.

NOTE

• To cancel the selection, press the DISC UP button to return to the previous step.

• If no operation is performed for 10 seconds or more or other button is operated after the FOLDER button has been pressed, searching of the desired tracks is cancelled.

• If no operation is performed for 5 seconds or more after the track is displayed, playback starts.

To play the same track repeatedly

Press the RPT button during playback to show “RPT” in the display.

To exit this mode, press the button again.

To play tracks in random order

Press the RDM button to show “RDM” in the display.

The iPod randomly selects tracks from the current category and plays the selected tracks.

To exit this mode, press the button again.

To play tracks in each album in random order

Press and hold the RDM button until you hear a beep to show “D-RDM” in the display.

The iPod randomly selects tracks in the album from the current category and play the selected tracks.

To exit this mode, press the button again.

To switch the display

You can display the track titles, artist names and album titles recorded in the iPod.

The display changes as follows every time the DISP button is pressed during playback.

Album title → Track name → Artist name → Normal display.

NOTE

• Up to 10 characters are shown in the display at once. If the title is cut off in the middle, press the PAGE button. The next characters are displayed every time this button is pressed.

• If no title is stored, “NO TITLE” is shown in the display.

• Characters that cannot be displayed are substituted by “ • ”.