To play from a USB memory device

1. Press the PWR button to turn on the audio system.

The system turns on in the last mode used.

2. Connect your USB memory device to the USB input terminal.

Refer to “How to connect a USB memory device”.

3. Press the CD button several times to switch to the USB mode. The input mode changes as follows every time the CD button is pressed.

CD mode → USB mode → Bluetooth® mode*

NOTE

• If your vehicle is equipped with audio input RCA terminals, pressing and holding the CD button for 2 seconds or more switches the system to the AUX mode.

4. Once the device is selected, playback starts and “U” appears on the display.

NOTE

• Depending on the condition of your USB device, it may take a longer time before the playback starts.

5. To stop the playback, press the AM/FM button or CD button to switch to a different mode.

NOTE

• To adjust the volume and tone, refer to “To adjust the volume” and “To adjust the tone”.

Supported compressed music files

This audio can play MP3, WMA, ACC and WAV files recorded in a USB memory device. This audio supports up to 65,535 files in 700 folders on 8 levels.

Folder selection order/file playback order (example)

The folder and file hierarchy in the USB memory device is shown below.

Folder selection

In the order

File selection

In the order

NOTE

• If a file protected by copyrights is played, “USB FILE ERROR” will appear and the file will be skipped.

To fast-forward/reverse the track

To fast-forward/reverse the current track, press the button or button.

Fast-forwar

To fast-forward the current track, press the button.

While the button is pressed, the track will be fastforwarded.

Fast-reverse

To fast-reverse the current track, press the button.

While the button is pressed, the track will be fastreversed.

To select a file

Press the TRACK button to select the desired file number.

Press : The file number increases by one.

Press : The file number decreases by one.

Press for a long period (approx. 2 seconds or more) : The file number increases continuously while the button is pressed.

Press for a long period (approx. 2 seconds or more) : The file number decreases continuouslywhile the button is pressed.

If the side of the button is pressed once after a few seconds, playback returns to the start of that track.

NOTE

• Every time the TRACK button is pressed, the file number in the display changes.

To find a track

You can select a folder to find a desired track.

1. Turn the FOLDER switch to show the desired folder in the display.

NOTE

• If no operation is performed for 10 seconds or more or other button is operated after the FOLDER switch has been turned, the selected track becomes unselected and the display returns to the playback display.

2. Press the FOLDER switch to select the folder.

NOTE

• When the DISC UP button is pressed, the selected folder is played from the beginning.

3. Turn the FOLDER switch to show the desired track in the display.

NOTE

• If no operation is performed for 5 seconds or more after the FOLDER switch is turned, the displayed track is played.

4. Press the FOLDER switch to select the file.

To play the same file repeatedly

Press the RPT button to show “RPT” in the display.

To cancel this mode, press the button again.

To play the files in the same folder repeatedly

Press and hold the RPT button until you hear a beep to show “D-RPT” in the display.

All tracks in the current folder are played repeatedly.

To exit this mode, press the button again.

To play a folder in random order

Press the RDM button to show “RDM” in the display.

The audio randomly selects tracks from the current folder and plays the selected tracks.

To exit this mode, press the button again.

To play all folders in random order

Press and hold the RDM button until you hear a beep to show “D-RDM” in the display.

The audio randomly selects tracks from all folders and plays the selected tracks.

To exit this mode, press the button again.

To find the start of each track in a folder for playback

Press the SCAN button. “SCAN” is shown in the display and the tracks in the current folder are played for several seconds from the beginning.

The file number flashes during this cueing playback.

To exit this mode, press the button again.

NOTE

• Once all tracks in the folder have been cued playback will restart from the beginning of the track that was playing when cueing started.

To find the start of first tracks in all folders for playback

Press and hold the SCAN button until you hear a beep to show “F-SCAN” in the display.

The first tracks in all folders are played for several seconds from the beginning.

Playback starts from the folder next to the one currently playing.

The folder number flashes during this cueing playback.

To exit this mode, press the button again.

NOTE

• Once the cueing playback ends, playback will start from the track at the beginning of the folder next to the one that was playing when the cueing started.

To switch the display

You can display titles with tag information.

Folder title

The display changes as follows every time the DISP button is pressed during playback.

Folder title → File title → Normal display

Tag information

1. Press and hold the DISP button until you hear a beep to show “TAG” in the display.
2. The display changes as follows every time the DISP button is pressed briefly:

Album title → Track title → Artist name → Genre (vehicles with Bluetooth® 2.0 interface) → Normal display

NOTE

• Press and hold the DISP button again until you hear a beep, and the tag information display returns to the folder title display.

• Up to 10 characters are shown in the display at once. If the title is cut off in the middle, press the PAGE button. The next characters are displayed every time this button is pressed.

• If no title is stored, “NO TITLE” is shown in the display.

• Characters that cannot be displayed are substituted by “ • ”.