Rear shelf panel
CAUTION
• Do not place luggage or other items on the rear shelf panel. Any items on the rear shelf panel would obstruct your rearward view, and they could fly forward and cause injuries or other mishap in the event of hard braking.
To install
1. Insert the concave portion (A) on the underside of the rear shelf panel into the inside protruding portion (B) of the tailgate.
CAUTION
• Lightly push the rear shelf panel to make sure that the concave portion (A) is set firmly in the protruding portion (B) of the tailgate. If the rear shelf panel is not securely locked in place, it could unhook while driving and cause injuries.
2. Hang the strap (C) of the rear shelf panel on the hook (D).
To remove
Follow this procedure in reverse to remove.
See also:
Customizing the air selection (Changing function settings)
Functions can be changed as desired, as stated below.
► Enable automatic air control:
When the heater operates, the air selection switch will be automatically controlled.
► Disable auto ...
If the warning display appears while driving
1. Stop the vehicle in a safe place and turn off the engine.
2. Wait approximately 30 seconds and then restart the engine to check whether the
warning display goes out; if it then remains off, ther ...
Automatic transmission INVECS-III Sports Mode 6CVT(Intelligent & Innovative Vehicle Electronic
Control System III)
The INVECS-III uses optimization and adaptation functions to optimally match
the gear ratio to driving and road conditions.
The CVT is capable of changing the gear ratio automatically and steplessl ...