Catalytic converterCatalytic converter  - Maintenance - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

The exhaust gas scavenging devices used with the catalytic converter are extremely efficient for the reduction of noxious gases. The catalytic converter is installed in the exhaust system.

It is important to keep the engine properly tuned to ensure proper catalyst operation and prevent possible catalyst damage.

• As with any vehicle, do not park or operate this vehicle in areas where WARNING

• As with any vehicle, do not park or operate this vehicle in areas where combustible materials such as dry grass or leaves can come in contact with a hot exhaust since a fire could occur.

• Paint should not be applied to the catalytic converter.

• Use fuel of the type recommended in “Fuel selection” on page 02. NOTE

• Use fuel of the type recommended in “Fuel selection” on page 02.

    See also:

    Checking battery electrolyte level
    The electrolyte level must be between the specified limit on the outside of the battery. Replenish with distilled water as necessary. The inside of the battery is divided into several compartment ...

    To install
    Align the tyre valve with the valve opening provided on the wheel cover. Then tap around the outer edge of the wheel cover with your hand to secure it in place. NOTE Full wheel covers have a sy ...

    To listen to a CD
    1- PWR (On-off switch) 2- U/M/L button 3- CD (CD mode changeover) button 4- Disc loading slot 5- CD eject button 6- DISC (Disc selection) button* 7- (Track down) button 8- (Track up) button 9- S ...