Water temperature gauge
The water temperature gauge indicates the engine coolant temperature when the ignition switch is “ON”.
CAUTION
If the indication needle enters the overheating zone while the engine is running, it indicates that the engine is possibly overheating. Immediately park your vehicle in a safe place and make the necessary corrections. (Refer to “Engine overheating” on page 8–15.)
While driving, care should always be taken to maintain the normal operating temperature.
See also:
ASC operation display or ASC OFF display
- ASC operation display/ASC indicator
The display/indicator will blink
when the ASC is operating.
- ASC OFF display/ASC OFF indicator
This display/incicator will turn on
when the ASC is turned o ...
Checking battery electrolyte level
The electrolyte level must be between the “max” and “min” marks stamped on the
outside of the battery. Replenish with distilled water as necessary.
The inside of the battery is divided in ...
Ignition switch turn-off reminder system
When the ignition switch is in any position other than the “LOCK” (PUSH OFF)
position, if you close all the doors and the rear hatch then try to lock the doors
and rear hatch by pressing the ...