Front fog lamp switch*
The front fog lamp can be operated when the headlamps or tail lamps turn on. Push the switch to turn on the front fog lamps, and push the switch again to turn them off.
The indication lamp in the instrument cluster will illuminate while the front fog lamp is on.
NOTE
(1) The front fog lamps are automatically turned off when the headlamps and
tail lamps turn off.
To turn on the front fog lamps again, push the switch again
when the headlamps or tail lamps turn on.
(2) In case of vehicles with Daytime
Running Lamp, the front fog lamps can be operated even if the lamp switch is set
to the “” (OFF) position, because the
low beam of the headlamps, tail lamps, etc. illuminate when the ignition key is
at the “ON” position.
See also:
Parking
To park the vehicle, first bring it to a complete stop, fully engage the parking
brake, and then move the gearshift lever to the “P” (PARK) position.
If you are going to leave the vehicle unatt ...
Daytime dipper button (meter illumination control)
Each time you press this button, there is a sound and the brightness of the instruments
changes.
1- Brightness display
2- Rheostat illumination button
Note
► You can adjust to 8 differe ...
Accessory socket
The accessory socket can be used while the ignition switch is in the “ON” or
“ACC” position.
Caution
► Be aware that using electronic equipment with the engine off may run the
bat ...