Outside rear-view mirror
On the driver’s seat side, a compound curved-surface mirror is used, while on the front passenger’s seat side, a single curvedsurface mirror is used.
The compound curved-surface mirror has different curvatures between the inner and outer sides of the boundary line (A).
The inner side of the boundary line provides the same vision as that available from an ordinary door mirror.
However, the outer side of the boundary line provides a wider vision than an ordinary door mirror.
WARNING
The sense of distance that you get from an object you see on the inner side of the mirror boundary line differs from the sense of distance that you get from an object you see on the outer side.
An object you see on the outer side of the boundary line of the mirror will look farther away than it actually is (farther away than if you see in a normal flat mirror) as compared with an object you see on the inner side.
See also:
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
a heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired. ...
Driver’s seat belt warning lamp and display
Warning lamp
A tone and warning lamp are used to remind the driver to fasten the seat belt.
If the ignition switch is turned to the “ON” position or the operation mode is
put in ON while a ...
Safe driving techniques
Driving safety and protection against injury cannot be fully ensured. However,
we recommend that you pay extra attention to the following:
Seat belts
Before starting the vehicle, make sure that yo ...