Rear lid lamp
Remove the cover with a screwdriver. Turn the bulb socket anti-clockwise to remove it. And remove the bulb from the socket by turning it anti-clockwise while pressing it inward.
1- Reversing lamp
2- Rear fog lamp
Sedan
Remove the clips and then turn down the cover.
Turn the bulb socket anti-clockwise to remove it. And remove the bulb from the socket by turning it anti-clockwise while pressing it inward.
1- Reversing lamp
2- Rear fog lamp
See also:
Windscreen wipers
Type 1
- Misting function. The wipers
will operate once. - Off
- Intermittent operation at intervals
of approximately 4 seconds –Slow
–Fast
Type 2
- Misting function. The wipers wil ...
Electronically controlled 4WDsystem
The electronically controlled 4WD system is a 4- wheel drive system that allows
one of three drive modes to be selected with a dial, in accordance with the driving
conditions.
The following drive ...
The Look
The 2010 Outlander gets a significantly revised front end that features new
headlights and a different grille.
Previous versions of the Outlander had a sleek front end with a grille that
wasn't ...