Mitsubishi Outlander

See also:

Dipper (High/Low beam change)
When the lamp switch is in the position, the beam changes from high to low (or low to high) each time the lever is pulled fully (1). While the high beam is on, the high-beam indication lamp in th ...

Setting the system
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

Emergency broadcasts
If an emergency broadcast is caught while receiving a UKW broadcast or playing back a cassette tape with the ignition switch in “ACC” or “ON” position, the display will show “ALARM” an ...