System armed modeSystem armed mode  - The security alarm has four modes - Security alarm system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

(The buzzer stops and the security indicator continues to blink with indicator’s reduced lit-up duration time.) Once the system preparation mode has ended, the system armed mode starts.

If an unlawful opening of any of the doors, rear hatch or bonnet is detected during the system armed mode, the alarm will be activated to warn people around the vehicle of an abnormal condition.

Also, if unlawful moving of the vehicle is attempted or a vehicle intrusion is detected, the alarm will be activated.

    See also:

    Headlamps
    NOTE • When entering a country in which vehicles are driven on the opposite side of the road to the country in which your vehicles is supplied, necessary measures have to be taken to avoid daz ...

    To deactivate
    The Auto Stop & Go (AS&G) system is automatically activated when the ignition switch is turned to the “ON” position. You can deactivate the system by pressing the “Auto Stop & Go ...

    How to enter PTYs in the memory
    As many as 6 PTYs can be entered in the memory. Follow the steps described below. 1. Press either the TUNE/SEEK button (5 or 6) to tune the PTY to be entered in the memory. 2. Press one of the mem ...