Towing bar mounting specificationsTowing bar mounting specifications - Trailer towing - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See the following table for fixing points (A) for the towing bar.

1: Vehicles equipped with 16 inch tyres that are without high ground suspensions

1: Vehicles equipped with 16 inch tyres that are without high ground suspensions
2: Vehicles equipped with 18 inchtyres
3: Vehicles equipped with 16 inch tyres that are with high ground suspensions

1: Vehicles equipped with 16 inch tyres that are without high ground suspensions

1: Vehicles equipped with 16 inch tyres that are without high ground suspensions
2: Vehicles equipped with 18 inch tyres
3: Vehicles equipped with 16 inch tyres that are with high ground suspensions

► The values under item 10 can be varied depending on the loading condition of Note

► The values under item 10 can be varied depending on the loading condition of cargo or luggage.

    See also:

    Ashtray
    Push the tray centre (A) to open. To remove the ashtray, pull up the inner part (B) from the sliding tray. CAUTION (1) Do not put papers and other things that burn into your ashtrays. If you ...

    To remove the spare tyre
    1. Lift up the board. 2. To remove the spare tyre, remove the installation clamp (A) by turning it anticlockwise. Note ► Put the spare wheel under the vehicle body near the jack. This make ...

    Cargo room lamp
    When replacing the bulb, put the cargo room lamp switch into the “OFF” position. 1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the lamp assembly ...